Cabinet Hinges – Everything You Need to Know

Few homeowners in Colorado ask about the hinges used on kitchen cabinetry even though every cabinet and door in their home has a hinge.  Hinges serve both functional and aesthetic purposes.  The three most common types for new kitchens in Denver are butt hinges, concealed hinges and surface-mounted hinges.  

cabinet hinges
Closeup detail of an actuator hydraulic hinge on the kitchen cupboard door

To help make sense of different hinge options, there is some basic terminology to be familiar with to help assure you select the perfect hinges for your dream kitchen.  

Hinge Terminology

  • The leaf is the part of the hinge that extends out from the barrel and is screwed into the door and frame. 
  • The pin is the rod running through the length of the barrel. High-end hinges are shipped assembled with the pins installed.
  • Leaf width is the dimension of the leaf from the center of the pin to the edge of the leaf.
  • Open hinge width is the overall dimension of the hinge when the two leaves are open flat.
  • The arm is associated almost exclusively with concealed hinges.  It is the part of the hinge that extends from the hinge and is attached to the inside of the cabinet.
  • The cup is the part of a concealed hinge that is attached to the door.
  • The Barrel is the circular, hollow section at the center of the hinge that the pin runs through.
  • Knuckles are the joining parts of a hinge through which the pin passes through.

Types of Cabinet Hinges

Butt hinges also referred to as mortise hinges, are what most homeowners in Colorado associate with kitchen cabinets.  A butt hinge comprises two matching leaves of metal connected by a central pin and barrel system. One leaf of the butt hinge is mortised, or recessed into the door, while the other is attached to the cabinet frame. When properly installed, the two leaves of a butt hinge should sit flush against each other, which allows the door to sit perfectly flush with the frame. Most butt hinges specified for Colorado homeowners are made of brass or stainless steel and can be finished to match the cabinet or other hardware in the kitchen.  Butt hinges can be enhanced with finials or decorative tips that allow homeowners in Colorado Springs to put their own personality into their cabinet hardware.  

Concealed hinges, as the name implies, are not visible when the door is closed and often are spring-activated or provide a soft-close feature to the cabinet door.  Concealed hinges are often preferred by Denver Metro homeowners because of the clean, modern look that they provide and ease of use.  

A third popular cabinet hinge is a surface mount. This is a hinge where one leaf is attached to the face of the door and the other leaf is attached to the face of the frame.  Neither side is mortised.  A half-surface mounted hinge has one leaf attached to the face of the door and the other is mortised into the edge of the frame.

What’s the right hinge for the cabinets in your dream kitchen?  That depends on the look, feel and functionality you desire.  To determine what’s best, give us a call or make an appointment to visit any of our showrooms listed here.

We have Four Colorado Locations to Serve You

JM Kitchen & Bath Design – Denver
2324 S. Colorado Blvd
Denver, CO 80222
(303) 300-4400
Showrooms Hours: Mon-Fri 9:00 am-5:00 pm, Sat 9:00 am-3:00 pm
*Appointments are encouraged, however, walk-ins are always welcome.

JM Kitchen & Bath Design – Castle Rock
1375 Caprice Drive
Castle Rock, CO 80109
(303) 688-8279
Showrooms Hours: Monday by Appointment Only, Tues-Fri 9:00 am-5:00 pm Saturday 9:00 am-1:00 pm *Appointments are encouraged, however, walk-ins are always welcome.

JM Kitchen & Bath Design – Colorado Springs
4557 Austin Bluffs Pkwy
Colorado Springs, CO 80918
(719) 596-9990
Showroom Hours: Monday-Friday 9:30 am-5:30 pm Saturday 10:00 am-2:00 pm
*Appointments are encouraged, however, walk-ins are always welcome.

JM Kitchen & Bath Design – Arvada
Arvada Market Place
7390 W 52nd Ave, Suite A
Arvada, CO 80002
(720) 674-6880
Showroom Hours: Monday – Friday 9:00 am – 6:00 pm Saturday 10:00 am – 4:00 pm
*Appointments are encouraged, however, walk-ins are always welcome.

Call any of our locations or click here to have one of our designers contact you or to schedule a showroom consultation.